Sheet Rolling Machine

Sheet Rolling Machine

Sheet Rolling  Machine

Sheet Rolling Machine: A sheet rolling / plate rolling machine is a piece of equipment that is used for the rolling of various types of sheet metals into round, semi-round, conical, or radii shapes. Method: Utilizing a series of precise and strong hardened rolls powered by either Hydraulic or Mechanical methods the rolls are brought to a pitching position with the material desired to be shaped. Procedure: Once the material is held between two of the rolls, the third or sometimes fourth roll is brought into position pushing the material and causes the material

Bending, or which is also referred to as pre-bend. Then the rolls begin to rotate the pulling material through pinched rolls and past the pushing rolls forcing an arc into the material. Use of sheet rolling machine: A sheet rolling machine is used for the production of almost all types of cylindrical products. Applications: Its applications extend to a very vast array of items including pressure vessels, home appliances, ships, wind power, military arsenal, automobile, and aerospace. Standard rolling machines: Some of the standard rolling

Sheet Rolling Machines include;
1 Rolls machines

2 Roll initial pinch
3 roll double pinch

4 roll variable translating geometry
5 roll double pinch Vertical rolls Specialty rolls or automated cycles

Preparation: Operator: The operator must be familiar with the structure and operation of the roll bending. The rolling process must arrange for two people to be operated at the same time, a person is responsible for the overall coordination, another person to assist workers, and two people must cooperate with the tacit. Understanding in order to finish the rolling process of the cylinder. Equipment: Before use, check the rolling machine is in good condition, after startup check whether the hydraulic system pressure is normal, the overturned side can be closed normally, when starting the machine the bottom roller of the plate rolls is under normal rotation. Alignment: Place the plate for rolling on the roll bending machine, and adjust the upper roller edge paralyzed with the cutting edge of the plate with the visual method, and the error control in the range of +0.5mm

.

Cone Type De-Coiler
Translate »
Open chat
1
Hello Sheet Rolling Machine
Can we help you?